Materials & Build
- Pump body: Stainless steel (corrosion resistant).
- Shaft & bushes — stainless steel AISI 304 for wear resistance
- Impellers: Multistage design for higher lift and steady flow.
- Copper Winded.
- Motor: Submersible motor designed to operate fully under water with IP68 protection.
Installation Considerations
Fully submerge and suspend vertically in the borehole using a strong rope or rod.
Use proper submersible cable and grounding with a dedicated electrical supply.
Install rigid discharge pipe with check valve and avoid dry running.
Ensure clean water with minimal sand and maintain access for maintenance.
Summary
- Type: 4″ borehole submersible pump.
- Power: ~1HP (0.75 kW).
- Hertz:
- Current: ~4.0 A
- Capacitor: 40 µF
- Flow/Head: Up to ~8 m³/h (8000 litres/hour) and ~55m head (180 ft).
- Use: Water extraction & supply from wells, irrigation, pressure boosting.
- Materials: Stainless steel, technopolymer parts.
- Protection: IP68 submersible.
Applications
- Deep well water supply for houses & buildings
- Irrigation systems (gardens, farms)
- Tank filling & pressure boosting
- Agricultural water distribution
- Civil & light commercial water systems
Not suitable for
- Muddy or slurry water
- Sewage or wastewater
- High sand content beyond limit
- Pumping near or above its maximum head
Reviews
There are no reviews yet.